World News

Tips to Ensure Work Zone Traffic Safety 

Hundreds of workers are killed annually because of work zone crashes. Where they are working for you, don’t you think they deserve work zone traffic safety? Obviously yes! Moreover, knowing that they are working in an entirely safe place, they can work more efficiently.

Thus, it is crucial to address the right system for redirecting traffic and using proper signage. Learning work zone traffic safety protect workers from being hit by moving vehicles. Also, the use of right signs prevents speeding vehicles from entering unintentionally into the work zone.

Now, let us learn how to ensure work zone traffic safety.

Signage – The first and the most important step that you should take while setting the construction work zone is to install proper signage, especially on the highways. Signs warn drivers about upcoming traffic constraints and prepare them for any barriers or other signage ahead. Further, there should be signage at the construction site that signals them to slow down the vehicle.

Traffic Control Barriers – Barriers such as cones, orange barrels, drums, and barricades should be used to establish a boundary. If not installed at the construction site properly, cars could get too close to equipment and workers. Also, make sure that these barriers are used inside the work zone and other dangerous areas as well. The number and size of barricades may vary depending upon the size of your project.

Adequate Lighting – At night, more safety is required. So, illuminating devices should be used when construction takes place at night. The upcoming traffic will easily notice flashing LED lights along with signs. Flares and ground reflectors should also be used along barricades to make their presence stand out. Also, light for equipment operators and workers on foot should be at least 5 foot-candles or greater.

Flaggers – Flagger is one of the best safety measures for people working at the construction site. They monitor traffic and helps to maintain a steady flow. They are highly important at places where only one lane is open. Moreover, flaggers must wear high-visibility clothing as it makes the worker visible from 1000 feet. All flaggers must be taught with authorized signalling methods and then should be certified.

Pedestrian Safety – If your work zone includes a pedestrian walkway or crosswalk, then make sure that proper signage and traffic control “Stop” and “Walk” signs are installed to promote pedestrian safety. Also, depending on the level of traffic and area, you can have a flagger stationed at the pedestrian walkway too.

 Create a Work Zone Checklist – Keep your work zone safe by using a work zone health and safety checklist for your workers.

After knowing the work zone safety tips, make sure to stick to follow them strictly, as your workers are your assets.

 

 

Leave a Comment

You may also like